Onkyo TX-RZ740 9.2 kotiteatterivahvistin, hopea

Onkyo TX-RZ740 9.2 kotiteatterivahvistin, hopea
Brand: Onkyo
999 EUR
Lisätietoja

9.2-Channel Network A/V Receiver A higher standard of soundl The TX-RZ740 not only elevates sound, but also that satisfied feeling you get every time you switch it on. The extra weight of the custom transformer, custom 10,000 μF capacitors, and aluminum heat-sink speak of an amp built for high-current power, enabling 3D audio to exhibit true-to-life spatiality and pin-point localization. Bass force is terrific, dynamics blindingly fast, and resolution grainless. Next-Generation Network Audio gathers multi-room platforms supported by 802.11ac1 Wi-Fi®, or enjoy powered and unpowered audio distribution. The receiver, which supports up to 7.2.4-ch of 3D sound with external amp, is certified for IMAX® Enhanced2 and is THX® Certified Select™ for a cinema-reference experience. From how it sounds to the way it makes you feel, the TX-RZ740 is made to savor now and in the future. 1 Some countries or regions have regulations that affect wireless signal strength and the use of Wi-Fi channels. 2 Enabled with a future firmware update. PRODUCT HIGHLIGHTS 185 W/Ch THX® Certified Select™ RZ Series DAA system Works with Sonos, Chromecast built-in1, AirPlay 2, DTS Play-Fi®, FlareConnect™2, Spotify®, Amazon Music, TIDAL, Deezer, TuneIn3 Supports 5.2.4-ch Dolby Atmos® and DTS:X® playback 11.2-ch pre-outs and processing for 7.2.4 layouts Dolby Atmos Height Virtualizer4 IMAX® Enhanced4 certified for IMAX® digital remasters Refined HDMI® grounds, SoC board, and power amps HDMI Sub/Zone 2 output5 for a sub-display or projector Quad-core SoC supports 802.11ac (2x2 MIMO) Wi-Fi®6 Zone 2 and Zone 3 speaker outputs Zone 2 and Zone 3 DACs for D/A audio in three rooms Zone 2/Zone B and Zone 3 line-outs share D/A audio Stereo Assign Mode supports Height-channel playback DSP-based Vocal Enhancer improves dialog audibility OSD features media input/output data display function HDMI supports 4K/60p, 4K HDR, BT.2020, HDCP 2.2 AccuEQ Advance 9-point calibration with AccuReflex™ Volume memory-presets for A/V inputs via front panel IP control, RS-232C, 12 V trigger output, and IR input AMPLIFIER FEATURES 185 W/Ch (6 Ω, 1 kHz, 10% THD, 1 channel driven), 175 W/Ch (6 Ω, 1 kHz, 1% THD, 1 channel driven, IEC) Certified for IMAX Enhanced and THX Certified Select Dynamic Audio Amplification with RZ Series Build Ultra-wide 5 Hz–100 kHz frequency response Custom-Built High-Current Low-Noise Power Transformer Custom high-current smoothing capacitors Non-phase-shift amp topology with discrete output stage Thick resonance-controlled extruded aluminum heat-sink Strengthened power-supply line for high-current dynamics Refined HDMI grounds and short signal-paths reduce noise Isolated SoC board reduces interference High current capability for 4-ohm speaker drive AKM (AK4458) 384 kHz/32-bit multichannel D/A conversion VLSC™ (Vector Linear Shaping Circuitry) noise filtering (Front L/R) PLL (Phase Locked Loop) anti-jitter technology for SPDIF audio Direct and Pure Audio modes for source-authentic expression Independent tone controls (bass/treble) for all channels (Zone 3 excluded) VIDEO & AUDIO SUPPORT Supports HDCP 2.2, 4K/60p, HDR (Dolby Vision™, HDR10, HLG), BT.2020, 4:4:4/24-bit, 3D Video, ARC (Audio Return Channel), DeepColor™, x.v.Color, and LipSync via HDMI Dolby Atmos, DTS:X, Dolby® TrueHD, and DTS-HD Master Audio® Dolby Atmos Height Virtualizer 3D processing Dolby Surround® and DTS® Neural:X upmixing technology IMAX Mode for IMAX Enhanced content THX® listening modes for movies, music, and games Sound optimization for games (Rock, Sports, Action, and RPG) Theater-Dimensional virtual surround-sound function NETWORK FEATURES Next-Generation Network Audio supports multi-room streaming and Onkyo Controller7 Works with Sonos for the Sonos Home Sound System8 Chromecast built-in and voice control9 with the Google Assistant AirPlay 2 multi-room audio and voice control10 with Siri DTS Play-Fi multi-room audio via Onkyo Music Control App7 FlareConnect multi-zone audio with compatible components Quad-core SoC supports high-speed 802.11ac (2x2 MIMO) Wi-Fi Hi-Res Audio playback via network (DSD 11.2 MHz/5.6 MHz/2.8 MHz11; FLAC, WAV [RIFF], AIFF, and ALAC to 192 kHz/24-bit12) CONNECTION FEATURES 7 HDMI inputs (1 front), 2 outputs (Main [ARC], Sub/Zone 2) 1 component video input (assignable) 2 composite video inputs (assignable) 2 digital audio inputs (optical and coaxial, assignable) 6 analog RCA inputs (assignable) 3.5 mm mini-stereo analog input (front) 1 phono input with built-in MM equalizer for turntable 3.5 mm setup mic input for AccuEQ Advance (front) 6.35 mm headphone jack (front) 11.2-channel pre-outs including Zone 3 pre-/line-out (analog RCA) Zone 2/Zone B analog RCA line-level outputs 9 screw-type speaker posts (including Zone 2) Bi-directional Ethernet terminal for network and IP control USB input (5 V/1 A) for audio playback (rear) RS-232C serial port for remote control IR (infrared) input for remote-control extenders 12 V trigger output (Main, assignable, 100 mA) AC socket for detachable IEC power cord ADVANCED FEATURES AccuEQ Advance 9-point calibration with AccuReflex Bluetooth® wireless technology Advanced Music Optimizer™ improves compressed audio playback Zone 2 and Zone 3 speaker outputs with Zone 2 and Zone 3 DACs play synced or unique D/A sources simultaneously (including HDMI/SPDIF13) Zone 2 line-out mode connects audio systems for independent D/A playback (including HDMI/SPDIF14) in two rooms Zone B line-out mode supports transmitter connection for wireless headphones15 Zone 2 and Zone 3 line-outs support simultaneous output13 Front-to-Height speaker-switching in Stereo Assign Mode for BGM 1080p to 4K Super Resolution upscaling via HDMI GUI with overlaid OSD via HDMI featuring media input/output display Crossover adjustment for each channel (40/50/60/70/80/90/100/120/150/180/200 Hz) A/V Sync Control (up to 500 ms in 5 ms steps at 48 kHz) Various efficient standby modes and HDMI pass-through Optional rack-mounting kit (IRK-155-3D) IP control for home automation, SmartGrid-ready 3-Mode display dimmer (Normal/Dim/Dimmer) 40 FM/AM random presets Redesigned simple remote control *1 The unit may automatically download and apply an Over-the-Air software update during setup. *2 FlareConnect is a proprietary network protocol that shares select audio sources between supported components. Please visit the Onkyo website for product compatibility information. *3 Service availability varies with region and subscriptions may be required. *4 Enabled with a future firmware update. *5 HDMI Zone 2 Out mode supports signals from HDMI inputs 1–3 only. *6 Some countries or regions have regulations that affect wireless signal strength and the use of Wi-Fi channels. *7 Available free at the App Store and Google Play for iPhone, iPad, and Android™ devices. Please check device and OS requirements before installation. *8 Requires a Sonos Connect (sold separately). *9 Voice control requires a smart speaker featuring the Google Assistant. *10 Voice control with Siri requires an Apple HomePod. *11 Converted to PCM. DSD playback over Wi-Fi cannot be guaranteed in all network environments. *12 Supported sampling rates may vary depending on network environment. ALAC supported to 96 kHz. *13 When set to Zone 2, HDMI audio is available on inputs 1–3. SPDIF and HDMI support PCM signals only. Simultaneous playback of multiple audio sources is enabled. Zone 3 supports analog/NET/Bluetooth. *14 When set to Zone B, encoded and PCM audio playback for all input terminals is enabled in Main and Zone B for simultaneous playback. When set to Zone 2, HDMI audio is available on inputs 1–3. SPDIF and HDMI support PCM signals only. Simultaneous playback of multiple audio sources is enabled. *15 Please check compatibility before purchasing and installing third-party products.